Smooth Fiberglass Entry Door Slab (3 Panel Craftsman)

The Pease Fiberglass Door. Replace just your door slab and keep your existing jambs and brickmold. A perfect replacement for Pease (carbon & steel) doors as well as most entry doors by Stanley, Taylor, Mastercraft, Perma Door, Castlegate, Masonite, Therma Tru, Jeld-Wen, Plastpro, and many others. Please make sure to check your measurements (door height, width, and thickness) and feel free to contact us with any measurement or fit questions.

Modern 3 panel Craftsman style provides a great balance of light and privacy in an entryway. Additional glass options can be found in our door glass section.

Sizes & Measurements:

Style: 3 Panel Craftsman

31.75″ x 79″:

• Slab width: 31.75″ (referred to nominally as a 32″, 2/8, or 2-foot-8-inch-wide door)
• Slab height: 79.0″ (referred to nominally as an 80″ or 6′ 8″ tall panel)
• Panel Thickness: 1.75″
• Select: With Glass: Clear 1 Lite (installed), With Glass: Clear 3 Lite (installed), With Glass: Clear 6 Lite (installed), With Glass: Portland Lead/Patina Finish (installed), Saxon Nickel Finish (installed), Saxon Lead/Patina Finish (installed) Clear 3 Lite (installed), or Without Glass: 23″ x 16.25″ Cut Out (takes Standard 22″ x 15.25″ Craftsman size glass in our door glass section)

35.75″ x 79″:

• Slab width: 35.75″ (referred to nominally as a 36″, 3/0, or 3-foot-0-inch-wide door)
• Slab height: 79.0″ (referred to nominally as an 80″ or 6′ 8″ tall panel)
• Panel Thickness: 1.75″
• Select: With Glass: Clear 1 Lite (installed), With Glass: Clear 3 Lite (installed), With Glass: Clear 6 Lite (installed), With Glass: Portland Lead/Patina Finish (installed), Saxon Nickel Finish (installed), Saxon Lead/Patina Finish (installed) Clear 3 Lite (installed), or Without Glass: 26″ x 16.25″ Cut Out (takes WIDE 25″ x 15.25″ Craftsman size glass in our door glass section)

Prep & other specifications:

• Select either No Hinge or Lock Prep or Hinge & Lock Prep:
• No Hinge or Lock Prep: allows for lock placement as desired and hinge side edge unfinished and can be mortised for hinge placements as needed
• PEASE Standard Hinge & Lock Prep 79″ tall doors:
• Hinge mortise (cut out) 6.5″ from top of door to top of first hinge, 37.5″ to top of second hinge, 68.5″ to top of bottom hinge
• Tubular lock prep comes for 2 3/8″ backset lockset and means the door will have two 2.125″ holes 5.5″ apart, each hole 2 3/8″ from the center of the hole to the edge of the door, with the top hole center 40.375″ from the top edge of the door
• Trimming: Can trim up to 2 inches off bottom, then we recommend sealing thoroughly with caulking and capping with a U-style doorsweep. Sides and top are not trimmable. This is a replacement for most entry doors (front, kitchen, side, garage/man door, etc.) and can also often be trimmed and used as a replacement for patio doors which are typically shorter in height (contact us to discuss if you need a door that requires more than 2 inches of trimming off bottom)